GSM alarm system GSM026 with support for wired and wireless sensors, with LCD display

SKU: BRT-565832

$ 99.29

Category:

A modern GSM alarm model with many functions, with an LCD screen and control buttons, support for wired and wireless sensors, with a backup battery, and a notification function about power outages at the site. Functions: - The alarm system has 7 zones for connecting wired sensors and 99 zones for connecting wireless sensors; - The LCD screen has a blue backlight, displays system status and other information, and also displays the current time; - Ability to add up to 6 phone numbers to notify owners when the alarm goes off. Up to 3 numbers for SMS notifications; - 3 groups for settings for arming/disarming according to a given time schedule; - Remote arming or disarming from a mobile phone (protected by a PIN code); - Using the buttons located on the alarm panel, the user can make calls from the alarm (speakerphone) by dialing a number, for example, to call the emergency service, etc.; - Built-in battery that will ensure continuous operation of the alarm when the power is turned off (up to 5 hours of operation); - The alarm has an SMS notification function when the electricity is turned off at the protected facility. If the power is turned off and the alarm switches to autonomous power from the built-in battery, you will receive a notification on your phone about the power being turned off, and you will also receive an SMS when the power returns; - Voice support for all operations; - Intercom or monitoring function via mobile phone, i.e. using a call you can hear sounds from a protected object or have a two-way communication session; - Possibility of recording the owner’s speech for up to 10 seconds, which is played back when dialing after triggering; - Programming of each zone: 1. Zone type: - real-time triggering, - triggering with a 40 second delay, - 24 hours a day security, - intersection sensors. 2. Placement of the security zone: - SOS alarm button, - fire sensor, - gas leak sensor, - door sensor, - room sensor, - window sensor, - balcony sensor, - perimeter security sensor. 3. Siren triggered: set whether the siren is active when sensors in this zone are triggered or not. Specification: - Operating voltage: DC12V/1A; - Standby current consumption: - Consumption in siren mode: - Wireless radio signal frequency: 433MHz,2262/4.7M ohm; - GSM network frequency range: 900/1800/1900MHz; - Built-in battery: NI-HI x 6 DC7.2V; - Siren volume: 110dB; The kit includes: - GSM alarm – 1 pc. - Remote control keychain with metal insert – 2 pcs. - Motion sensor – 1 pc. - Door/window opening sensor – 1 pc. - Mini siren – 1 pc. - Power supply 12V 1A – 1 pc. - User manual – 1 pc.

GSM alarm system GSM026 with support for wired and wireless sensors, with LCD display

Related products